Browse your product documentation including release notes and installers
The 3.6 Carbon Black Cloud Windows sensor uses a content management system to enable dynamic configuration of prevention features.
For the 3.6 sensor to be fully functional, customers who have restrictive firewall policies must add a new exclusion prior to installing or upgrading to 3.6. These customers must add a new network/proxy exclusion for “content.carbonblack.io”.
The following features require the exclusion or they will not work with the 3.6 sensor: Enterprise EDR, Device Control, AMSI Prevention, and Unified Binary Store.
What port? 443?
Is 54443 used as a backup port?
Do we need to exclude inspection of all traffic to/from this host?
SSL Decryption Exception?
or do we just need to not block traffic?
Are those listed features going to be part of Endpoint Standard?
SSL Inspection bypass on the Proxy or Full traffic Bypass ?
I would also know if SSL inspection would break the connection or not. i.e. Does the agent use the root cert store on endpoints to validate AND would it also require turning off Authentication through the proxy as well?
The should have come with an example and CB should have explained why it is needed.
Yes, why is an exclusion needed. example please.....
A screenshot would be great.
If it helps others, I spotted issues CB Defense updating with zscaler.
I had to bypass '.carbonblack.io' from SSL interception in order for the udpates to work.
Same issue here with zscaler, we must bypass .carbonblack.io.
You dropped the ball big time on effective communication.
From you poorly written release notes for 3.6.
The 3.6 Windows sensor leverages a content management system to enable the dynamic configuration of prevention features. Prior to installing or upgrading to 3.6, if you have restrictive firewall policies active in your environment, you might need to add a new firewall/proxy exclusion for the sensor to be fully functional.
Add a new network/proxy exclusion for a direct connection over TCP/443 to https://content.carbonblack.io
Enterprise EDR, AMSI Prevention, and Unified Binary Store require the exclusion to work with the 3.6 sensor.
Please answer these VERY IMPORTANT questions
Which Firewall? The endpoint or the company egress firewall. Big difference.
Is this an inbound or outbound connection?
How about you provide Step by Step screenshots.
Another thing you must give information on:
How will we know if the firewall exclusion is required in our environment?
Where would we look in the CB console to is see if these new features are working or not working?
@esullivan Can we please get an update on this? I know you're just the messenger, but it seems that everyone has the same concerns, and I would imagine that the product team has ready answers on this that just weren't communicated. Please relay this to them so they can provide better guidance.
I don't see any mention of Cb Defense (new name Endpoint Standard). Does it apply to this as well?
@assafefrat Port 54443 is used as a backup port for sensor communications (https://dev-prod05.conferdeploy.net for example). https://community.carbonblack.com/t5/Knowledge-Base/Carbon-Black-Cloud-What-Ports-must-be-opened-on-...
@nolsen @jfaulhefer You will want to exclude all of our URLs from any SSL inspection/encryption/decryption, and allow a direct connection. Both incoming and outgoing are required as TCP require bi-directional communication.
@ken9k @lourenco_tf AMSI Prevention will be a part of Endpoint Standard, and therefore is included in this new exception: https://community.carbonblack.com/t5/Carbon-Black-Cloud-Windows/tkb-p/release_notes_windows
@Navar_Holmes @tdorsch If you are running any 3.6 sensors and either Enterprise EDR or Endpoint Standard, you will want to exclude the new URL, as it is required for the new features. The Release Notes I linked directly above will explain the new features in a bit more detail. These changes are required on your network firewall, and both incoming and outgoing are required as TCP require bi-directional communication.
I would recommend that anyone with outstanding questions in regards to this new firewall exception, go and open a case with Customer Support and they will be able to help assist with any further questions: https://community.carbonblack.com/t5/Support-Zone/tkb-p/support
@cfanion, thank you for your prompt response- this is the confirmation I think we were looking for. Correct me if I'm wrong, but to sum up:
I'm excited to see what the new AMSI features bring.
@firstguy Both are correct! Although 54443 will only be needed for the devices URL as outlined in: https://community.carbonblack.com/t5/Knowledge-Base/Carbon-Black-Cloud-What-Ports-must-be-opened-on-...
443 is all that is required for the other URLs.
If I may provide some feedback in regards to the Sensor configuration, please cover scenarios where proxy servers are utilized. Not every company is going to permit their endpoints to communicate directly to the internet, so security gateways/proxies are going to be utilized.
For windows systems, the sensor should be referring to the system (IE/Edge) proxy settings.
In every case where I've raised a support ticket, I've explained that we use proxies, and the response is almost always 'please ensure your endpoints can communicate directly with the internet'. And we go back and forth about our use of proxies. It adds lots of lost time trying to resolve the case, as we go back and forth.
In scenarios where proxies change, I've seen many cases where despite going through the registry to ensure there's absolutely no reference to the old proxy, we still see the sensor talking to the old proxy..
it really needs to be improved.
If you are a Cisco Firewall user you will need to add all the carbonblack URLs not just content.carbonblack.io, to multiple location within the Cisco firewall. This is because carbonblack is not fully trusted by Cisco. As a note carbonblack needs to partner with Cisco Threat Defense.
If you are using Cisco Firewall the process that a URL/domain is checked: (if you are using these features)
1st DNS Policy
2nd Access Control Policy - Security Intelligence
3rd Access Control Policy - Rules. Your traditional URL approved list.
I've received notification:
We have identified that some of your recently deployed or updated endpoints running the Carbon Black Cloud Windows 3.6 sensor are unable to communicate with content.carbonblack.io. This connectivity is required to deliver certain functionality of the 3.6 sensor. To enable connectivity, update your firewall configuration.
My environment is divided in a bunch of small parts, so it's pretty difficult to keep an eye on every possible firewall out there.
If you are mentioning "We have identified that some of your recently deployed or updated endpoints ... are unable to communicate with content.carbonblack.io" - is there a way to determine, which endpoints exactly do have this problem?
I'm assuming that you need a rule on both pc and perimeter firewalls to allow this outgoing traffic.
I'm going to push an update to one station and test this change and will report back.
I would recommend if you have not done so yet is to add all the CB URLs to your corporate firewall approved list.
Depending on how your firewall and other edge protection devices work together, you might need to add the URLs to multiple locations.
The last thing you need is your end points having inbound and/or outbound communication issues with CB Mothership. And even more so if one or more of the CB URLs end up on a denied list.
You might even think about adding carbonblack.com to this list also as it has been on Cisco Talos Intelligence block list.
Just wanted to shed some light on the URL's. You will not need to have any of the Prod0x URLs that your orginization is not on. For example, if your are North America based and on Prod05, there will not need to be a extra entry on your firewall for any of the other Prod0x URLs.
Just for reference, in case anyone did not see this...
Have a great day!
Good afternoon All,
Installed on one station version 220.127.116.119 took some time and was successful with no need to change firewalls, now pushing to more stations.
It depends on other security tools and their configs. So if you are limiting traffic by inspecting it using proxy, then you will need to skip Cb url's destinations and allow free traffic.